Huawei Quidway S8500 Series - Display Arp Proxy

Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 2 ARP Configuration Commands
Huawei Technologies Proprietary
2-8
Description
Use the display arp multi-port command to display configuration information about
multicast ARP. The multicast ARP (that is, multiple-port ARP) feature allows one ARP
entry to correspond to multiple outgoing ports; it is used to send one packet to multiple
ports simultaneously.
Related command: arp static.
Example
# Display configuration information about the multicast ARP entry with the IP address of
10.10.10.98.
<Quidway> display arp multi-port 10.10.10.98
IP Address :10.10.10.98
Mac Address :0150-0098-0098
VLAN ID :20
ARP Port-List : Ethernet6/1/2 Ethernet6/1/3
Ethernet6/1/4 *Ethernet6/1/5
Ethernet6/1/6 Ethernet6/1/7
Ethernet6/1/8 Ethernet6/1/9
Ethernet6/1/1
VPN-Name :Public-ARP
When a “*” precedes a port, the port is in the Up state; otherwise, the port is in the Down
state.
2.1.8 display arp proxy
Syntax
display arp proxy [ vlan vlan-id ]
View
Any view
Parameter
vlan-id: Specifies the VLAN ID.
Description
Use the display arp proxy command to display the state of the ARP proxy of a
specified VLAN. An ARP proxy can be in enabled or disabled state.
Related command: arp proxy enable.
Example
# Display the state of the ARP proxy of VLAN 3.