Huawei Quidway S8500 Series User Manual

Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 3 POS Port Configuration Commands
Huawei Technologies Proprietary
3-6
View
User view
Parameter
ipcp: IPCP debugging switch.
lcp: LCP debugging switch.
all: All POS debugging switch
core event: PPP core event debugging switch.
ip packet: IP packet debugging switch.
mpls-multicast packet: MPLS-MULTICAST packet debugging switch.
mpls-unicast packet: MPLS-UNICAST packet debugging switch.
all: All debugging switches.
error: Error debugging switch.
event: Event debugging switch.
packet: Packet debugging switch.
state: State machine debugging switch.
interface-number: POS port number, in the format of board slot ID/daughter card slot
ID/ port ID, where board slot ID refers to the ID of the slot for LPU, in the range of 2 to 6
(for S8505), or 0 to 3 and 6 to 9 (for S8508), or 0 to 5 and 8 to 13 (for S8512); daughter
card slot ID refers to the ID of the slot for daughter, with the value of 1; port ID refers to
the sequence number on the LPU for the port, in the range of 1 to 4.
Description
Use the debugging ppp command to enable debugging for the POS port.
Use the undo debugging ppp command to disable debugging for the POS port.
By default, no debugging is enabled on the POS port.
Example
# Enable all debugging for the POS port.
<Quidway> debugging ppp all
3.1.6 flag
Syntax
flag c2 flag-value
undo flag c2
flag { j0 | j1 } { sdh | sonet } flag-value

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English