Command Manual – Integrated Management
Quidway S8500 Series Routing Switches Chapter 1
HGMP V1 Configuration Commands
Huawei Technologies Proprietary
1-28
z trans: Specifies to forward data to the CPU.
z igmp: Specifies to forward IGMP packets to the CPU.
Description
Use the add addritem command to add a unicast MAC address entry or a multicast
MAC address entry for an Ethernet switch. An S2008B, S2016B, or S2026B series
Ethernet switch can have only one multicast MAC address added.
Related command: search uniaddr and search multicast.
Example
# Add a unicast MAC address entry with a MAC address of 0e0-fc01-1000 for the
Ethernet switch with a position parameter of 3/1/6-/, specifying the entry as an aging
entry.
[Quidway-lanswitch3/1/6-/] add addritem 00e0-fc01-1000 unicast 1 aged
Waiting.....
Add address item successfully, MAC Addr:00-e0-fc-01-10-00
1.3.2 delete multicast
Syntax
delete multicast mac-addr vlanid vlanid
View
lanswitch view
Parameter
mac-addr: MAC address of the multicast entry to be deleted.
vlanid: VLAN ID of the VLAN containing the multicast entry.
Description
Use the delete multicast command to remove a multicast address entry.
Related command: search multicast.
Description
# Remove the multicast entry with a MAC address of 0100-5e00-0001 of the Ethernet
switch with a position parameter of 3/1/3-/.
[Quidway-lanswitch3/1/3-/] delete multicast 0100-5e00-0001 vlanid 1
To Next Page
Loading...
Need help?
General