Huawei Quidway S8500 Series - Display Vrrp Statistics

Command Manual – Reliability
Quidway S8500 Series Routing Switches Chapter 1
VRRP Configuration Commands
Huawei Technologies Proprietary
1-3
Field Description
Auth Type Authentication type
Track IF Track interface
Pri Reduced
Reduced priority value for virtual router when track
interface is Down
Virtual IP Virtual IP address list of virtual router
Master IP IP address of the master device in virtual router
1.1.3 display vrrp statistics
Syntax
display vrrp statistics [ vlan-interface interface-number [ virtual-router-ID ] ]
View
Any view
Parameter
vlan-interface interface-number: Specifies the name of the VLAN interface to which
the virtual router belongs.
virtual-router-ID: VRRP virtual router ID, ranging from 1 to 255.
Description
Use the display vrrp statistics command to view the information about the VRRP
statistics.
If the interface name and virtual router ID are not specified, the statistics information
about all the virtual routers on the switch will be displayed. If only the interface name is
specified, the statistics information about all the virtual routers on the interface will be
displayed. If the interface name and virtual router ID are specified, the statistics
information about the specified virtual router on the interface will be displayed.
Example
# Display the VRRP statistics information on VLAN-interface 2.
<Quidway> display vrrp statistics vlan-interface 2
Interface : Vlan-interface2
VRID : 1
CheckSum Errors : 0 Version Errors : 0
VRID Errors : 0 Advertisement Interval Errors : 0
IP TTL Errors : 0 Auth Failures : 0
Invalid Auth Type : 0 Auth Type Mismatch : 0