Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-12
Undelete flash:/sample.bak ?[Y/N]:y
%Undeleted file flash:/sample.bak
1.2 Configuration File Management Commands
1.2.1 display current-configuration
Syntax
display current-configuration [ controller | interface interface-type
interface-number | configuration [ configuration ] ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Parameter
controller: Views the configuration information of controllers.
interface: Views the configuration information of interfaces.
interface-type: Type of the interface, including Aux, Ethernet, GigabitEthernet, NULL,
Vlan-interface, M-Ethernet, LoopBack.
interface-number: Number of the interface.
configuration configuration: Views the pre-positive and post-positive configuration
information. The value of configuration is the key word of the configuration, such as:
z system: Views the host name.
z timerange: Views the configuration information of time range.
|: Filters the configuration information to be output by regular expression.
begin: Begins with the line that matches the regular expression.
exclude: Excludes lines that match the regular expression.
include: Includes lines that match the regular expression.
regular-expression: Defines the regular expression.
To Next Page
Loading...
Need help?
General