Huawei Quidway S8500 Series - Display Bgp Routing-Table Cidr

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-18
Field Description
Origin attribute of route, which indicates that the route updates its
origin relative to the route originating it from AS. It has three optional
values:
IGP
The route belongs to inside of AS. BGP treats aggregate
route and the route defined by the command network as
inside of AS, and origin type as IGP.
EGP The route is learned from exterior gateway protocol (EGP).
Origin
INC
Short for INCOMPLETE: indicates that the original source of
the route information is unknown (learned by other
methods). BGP sets the origin of the route imported through
other IGP protocols as INCOMPLETE
As-path
AS-path attribute of route, which records all AS areas that the route
passes. With it, route loop can be avoided
5.1.18 display bgp routing-table cidr
Syntax
display bgp routing-table cidr
View
Any view
Parameter
None
Description
Use the display bgp routing-table cidr command to view the routing information
about the non-natural mask (namely Classless Interdomain Routing, CIDR).
Example
<Quidway> display bgp routing-table cidr
Flags: # - valid, ^ - best,
D - damped, H - history,
I - internal, S – aggregate suppressed
B – balance
Dest/Mask Pref Next-Hop Med Local-pref Origin As-path
--------------------------------------------------------------------
#^ 22.1.0.0/16 256 200.1.7.2 100 INC 200
# 88.1.0.0/16 60 0.0.0.0 IGP