Huawei Quidway S8500 Series User Manual

Command Manual – Port
Quidway S8500 Series Routing Switches
Chapter 2 Ethernet Link Aggregation Configuration
Commands
Huawei Technologies Proprietary
2-2
2.1.2 debugging lacp state
Syntax
debugging lacp state [ interface interface-type interface-number [ to interface-type
interface-number ] ] { { actor-churn | mux | partner-churn | ptx | rx }* | all }
undo debugging lacp state [ interface interface-type interface-number [ to
interface-type interface-number ] ] { { actor-churn | mux | partner-churn | ptx | rx }* |
all }
View
User view
Parameter
interface interface-type interface-number [ to interface-type interface-number ]:
Specifies a port or ports. The command without the parameter to specifies one port,
while the command with the parameter to specifies several contiguous ports.
interface-type indicates port type. interface-number indicates port number. For more
information, see the parameter description of the interface command.
actor-churn: Actor-churn state machine debugging switch.
mux: MUX state machine debugging switch.
partner-churn: Partner-churn state machine debugging switch.
ptx: PTX state machine debugging switch.
rx: RX state machine debugging switch.
all: debugging switch of all state machines.
Description
Use the debugging lacp state command to enable LACP state machine debugging for
the port.
Use the undo debugging lacp state command to disable LACP state machine
debugging for the port.
Example
# Enable debugging of all LACP state machines.
<Quidway> debugging lacp state all
2.1.3 debugging link-aggregation error
Syntax
debugging link-aggregation error

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English