Huawei Quidway S8500 Series - Display Bgp Routing-Table Different-Origin-As

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-22
Field Description
Origin attribute of route, which indicates that the route updates its
origin relative to the route originating it from AS. It has three
optional values:
IGP
The route belongs to inside of AS. BGP treats aggregate
route and the route defined by the command network as
inside of AS, and origin type as IGP.
EGP
The route is learned from exterior gateway protocol
(EGP).
Origin
INC
Short for INCOMPLETE: indicates that the original source
of the route information is unknown (learned by other
methods). BGP sets the origin of the route imported
through other IGP protocols as INCOMPLETE
As-path
AS-path attribute of route, which records all AS areas that the
route passes. With it, route loop can be avoided
5.1.22 display bgp routing-table different-origin-as
Syntax
display bgp routing-table different-origin-as
View
Any view
Parameter
None
Description
Use the display bgp routing-table different-origin-as command to view routes that
have different source autonomous systems
Example
# View the routes that have different source ASs.
<Quidway> display bgp routing-table different-origin-as
Flags: # - valid, ^ - best,
D - damped, H - history,
I - internal, S – aggregate suppressed
B – balance
Destination/Mask Pref Next-hop Med Local-Pref Origin As-Path
------------------------------------------------------------------