Huawei Quidway S8500 Series - Display Dhcp Server Expired

Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 4 DHCP Configuration Commands
Huawei Technologies Proprietary
4-15
Parameter
all: Specifies all IP addresses.
ip ip-address: Specifies an IP address.
Description
Use the display dhcp server conflict command to display the statistics about DHCP
address conflicts.
Related command: reset dhcp server conflict.
Example
# Display the statistics about DHCP address conflicts.
<Quidway> display dhcp server conflict all
Address Discover Time
10.110.1.2 Jan 11 2003 11:57: 7 PM
Table 4-1 Description on the fields of the display dhcp server conflict command
Field Description
Address The IP address that causes the conflict
Discover Time The time when the conflict is discovered
4.2.14 display dhcp server expired
Syntax
display dhcp server expired { ip ip-address | pool [ pool-name ] | interface
[ vlan-interface vlan-id ] | all }
View
Any view
Parameter
ip ip-address: Specifies an IP address.
pool [ pool-name ]: Specifies a global address pool. If you do not input a pool-name, all
global address pools are included.
interface [ vlan-interface vlan-id ]: Specifies a VLAN interface address pool. If you do
not input a vlan-id, all VLAN interface address pools are included.
all: Specifies all DHCP address pools.