Huawei Quidway S8500 Series User Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 2 RIP Configuration Commands
Huawei Technologies Proprietary
2-14
[Quidway] interface Vlan-interface 10
[Quidway-Vlan-interface10] rip metricout 2
2.1.17 rip output
Syntax
rip output
undo rip output
View
Interface view
Parameter
None
Description
Use the rip output command to allow an interface to transmit RIP packets to the
external.
Use the undo rip output command to disable an interface to transmit RIP packets to
the external.
By default, all interfaces except loopback interfaces are enabled to transmit RIP
packets to the external.
This command is used in cooperation with the other two commands: rip input and rip
work. Functionally, rip work is equivalent to rip input & rip output. The latter two
control the receipt and the transmission of RIP packets respectively on an interface.
The former command equals the functional combination of the latter two commands.
Related command: rip input, rip work.
Example
# Disable the interface Vlan-interface 10 to transmit RIP packets.
[Quidway] interface Vlan-interface 10
[Quidway-Vlan-interface10] undo rip output
2.1.18 rip split-horizon
Syntax
rip split-horizon
undo rip split-horizon

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English