Huawei Quidway S8500 Series User Manual

Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-12
Ethernet port, PPP users of the ISP can obtain their IP addresses from the IP address
pool, through which the tension of the port address pool can be eased.
Related command: remote address.
Example
# Create a local IP address pool ranging from 129.102.0.1 to 129.102.0.10.
[Quidway] domain huawei163.net
[Quidway-isp-huawei163.net] ip pool 0 129.102.0.1 129.102.0.10
2.1.11 level
Syntax
level level
undo level
View
Local user view
Parameter
level: User priority, an integer ranging from 0 to 3.
Description
Use the level command to set user priority.
Use the undo level command to restore the default user priority.
By default, the user priority is 0.
Related command: local user.
 Note:
If you specify not to authenticate or to authenticate by passwords, the levels of the
commands available to an authenticated user are determined by the priority of the user
interface. If a user needs to provide user name and password to pass the
authentication, the levels of the commands available to an authenticated user are
determined by the priority of the user.
Example
# Set the user priority to 3.
[Quidway-luser-huawei1] level 3

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English