Huawei Quidway S8500 Series User Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-40
4.6.6 info-center channel name
Syntax
info-center channel channel-number name channel-name
undo info-center channel channel-number
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name: Specifies the channel name with a character string not exceeding 30
characters, excluding digit, "-", "/" or "\". .
Description
Use the info-center channel name command to rename a channel specified by the
channel-number as channel-name.
Use the undo info-center channel command to restore the channel name.
The system assigns a channel in each output direction by default. See the table below.
Table 4-8 Numbers and names of the channels for log output
Output direction Channel number Default channel name
Console 0 console
Monitor 1 monitor
Info-center loghost 2 loghost
Trap buffer 3 trapbuf
Logging buffer 4 logbuf
snmp 5 snmpagent
Log file 6 Logfile
Note that the channel name cannot be duplicated.
Example
# Rename the channel 0 as execconsole.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] info-center channel 0 name execconsole

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English