Huawei Quidway S8500 Series - Debugging Hwtacacs; Display Hwtacacs

Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-51
2.3.2 debugging hwtacacs
Syntax
debugging hwtacacs { all | error | event | message | receive-packet | send-packet }
undo debugging hwtacacs { all | error | event | message | receive-packet |
send-packet }
View
User view
Parameter
all: Enables all HWTACACS debugging.
error: Enables error debugging.
event: Enables event debugging.
message: Enables message debugging.
receive-packet: Enables incoming packet debugging.
send-packet: Enables outgoing packet debugging.
Description
Use the debugging hwtacacs command to enable HWTACACS debugging.
Use the undo debugging hwtacacs command to disable HWTACACS debugging.
By default, HWTACACS debugging is disabled.
Example
# Enable the event debugging of HWTACACS.
<Quidway> debugging hwtacacs event
2.3.3 display hwtacacs
Syntax
display hwtacacs [ hwtacacs-scheme-name]
View
Any view
Parameter
hwtacacs-scheme-name: Scheme name of the HWTACACS server, a string of 1 to 32
case-insensitive characters, excluding "?". If this argument is null, configuration
information of all HWTACACS schemes are displayed.