Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 6 RMON Configuration Commands
Huawei Technologies Proprietary
6-11
View
Ethernet port view
Parameter
entry-number: Number of the entry to be added/deleted, ranging from 1 to 65,535.
buckets number: Capacity of the history table corresponding to the control line.
interval sampling-interval: Sampling interval, ranging from 5 to 3600 (measured in
seconds).
owner text-string: Creator of this entry. Length of the character string ranges from 1
to127.
Description
Use the rmon history command to add an entry to the history control table.
Use the undo rmon history command to cancel an entry from history control table.
Perform this command to sample, set sample parameter (sample time interval) and
storage amounts for a port. RMON will periodically perform data collection and save for
query on this port. Sample information includes utility, error number and total packet
number.
Related command: display rmon history.
Example
# Create a history control table entry with the index number of 15, capacity of 100 and
sampling interval of 10 seconds. The owner is tester.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway]interface Ethernet 2/1/1
[Quidway-Ethernet2/1/1] rmon history 15 buckets 100 interval 10 owner tester
6.1.10 rmon prialarm
Syntax
rmon prialarm entry-number prialarm-formula prialarm-des sampling-timer { delta |
absolute | changeratio } rising-threshold threshold-value1 event-entry1
falling-threshold threshold-value2 event-entry2 entrytype { forever | cycle
cycle-period } [ owner text ]
undo rmon prialarm entry-number
View
System view
To Next Page
Loading...
Need help?
General