Huawei Quidway S8500 Series User Manual

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches Chapter 1
HGMP V1 Configuration Commands
Huawei Technologies Proprietary
1-32
0xFF-doesn't change port stats, other-no support operation
================================End===================================
 Note:
This command does not support configuring S2403F and S2403 Ethernet switches on
NMS.
1.3.7 modify multiaddr
Syntax
modify multiaddr mac-addr vlanid port-list mctype
View
lanswitch view
Parameter
mac-addr: MAC address of the multicast address entry to be modified.
vlanid: VLAN ID of the multicast group.
port-list: Port list for the multicast group.
mctype: Specifies how the multicast group forward data to the CPU.
no: Specifies not to forward to the CPU.
trans: Specifies to forward data to the CPU.
igmp: Specifies to forwards IGMP packets to the CPU.
Description
Use the modify multiaddr command to modify the multicast address entry of an
Ethernet switch.
Related command: search multicast.
Example
# Modify the multicast address entry of the Ethernet switch with a position parameter of
3/1/3-/.
[Quidway-lanswitch3/1/3-/] modify multiaddr 0111-2233-4455 10 5 no
Waiting.....
Modify addr item successfully, Mac addr: 01-11-22-33-44-55
1.3.8 modify uniaddr

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English