Huawei Quidway S8500 Series User Manual

Command Manual – Getting Started
Quidway S8500 Series Routing Switches Chapter 1
Commands Used to Log in to Switch
Huawei Technologies Proprietary
1-21
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway] user-interface aux 0
[Quidway-ui-aux0] screen-length 20
1.1.23 send
Syntax
send { all | number | type number }
View
User view
Parameter
all: Configures to send message to all user interfaces.
type: Specifies the user interface type, which can be console, aux or vty.
number: Specifies the absolute/relative number of the user interface. If it follows type, it
is a relative number. For Aux or Console user types, it can be 0 only. For VTY user type,
it ranges from 0 to 4. If the type is not specified, it is an absolute number, which ranges
from 0 to 6.
Description
Use the send command to send messages between different user interfaces.
Example
# Send message to all the user interfaces.
<Quidway> send all
1.1.24 service-type telnet
Syntax
service-type telnet [ level level ]
undo service-type telnet
View
Local-user view
Parameter
level: Specifies which level of command a user can use after login, ranging from 0 to 3
and defaults to level 2.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English