Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 2 RIP Configuration Commands
Huawei Technologies Proprietary
2-5
View
RIP view
Parameter
acl-number: Access control list number used for filtering the destination addresses of
the routing information.
ip-prefix-name: Name of address prefix list used for filtering the destination addresses
of the routing information.
gateway ip-prefix-name: Name of address prefix list used for filtering the addresses of
the neighboring routers advertising the routing information.
Description
Use the filter-policy gateway import command to configure to filter the received
routing information distributed from the specified address.
Use the undo filter-policy gateway import command to configure not to filter the
received routing information distributed from the specified address.
Use the filter-policy import command to configure the filtering to the received global
routing information.
Use the undo filter-policy import command to disable filtering to the received global
routing information
By default, RIP does not filter the received routing information.
Related commands: acl, filter-policy export, ip ip-prefix.
Example
# Configure the filtering of the received global routing information according to ACL
2000.
[Quidway-rip] filter-policy 2000 import
2.1.6 host-route
Syntax
host-route
undo host-route
View
RIP view
Parameter
None
To Next Page
Loading...
Need help?
General