Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 5 PIM Configuration Commands
Huawei Technologies Proprietary
5-7
5.1.7 debugging pim sm
Syntax
debugging pim sm { all | mbr { alert | fresh } | verbose | mrt | msdp | timer { assert
| bsr | crpadv | jp | jpdelay | mrt | probe | spt } | warning | { recv | send } { assert |
bootstrap | crpadv | jp | reg | regstop } }
undo debugging pim sm { all | mbr { alert | fresh } | verbose | mrt | msdp | timer
{ assert | bsr | crpadv | jp | jpdelay | mrt | probe | spt } | warning | { recv | send }
{ assert | bootstrap | crpadv | jp |
reg | regstop } }
View
User view
Parameter
all: All debugging information of PIM-SM.
mbr: Debugging information of PIM-SM multicast border router event. Alert stands for
debugging alert information of PIM-SM multicast border router fresh stands for
debugging renew information of PIM-SM multicast.
verbose: Debugging detail information of PIM-SM.
mrt: Debugging information of PIM-SM multicast routing table.
msdp: Debugging information of correspondence between PIM SM and MSDP.
timer: Debugging information of PIM-SM timer.
assert | bsr | crpadv | jp | jpdelay | mrt | probe | spt: PIM-SM timer type.
warning: Debugging information of PIM-SM warning message.
recv: Debugging information of PIM-SM receiving packets.
send: Debugging information of PIM-SM sending packets.
assert | bootstrap | crpadv | jp | reg | regstop: Packets type.
Description
Use the debugging pim sm command to enable PIM-SM debugging functions.
Use the undo debugging pim sm command to disable the debugging functions.
By default, PIM-SM debugging functions are disabled.
Example
# Enable all PIM-SM debugging functions
<Quidway> debugging pim sm all
To Next Page
Loading...
