Huawei Quidway S8500 Series User Manual

Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 3 POS Port Configuration Commands
Huawei Technologies Proprietary
3-8
[Quidway] interface GigabitEthernet4/2/1
[Quidway-GigabitEthernet4/2/1] port-mode wan
[Quidway-GigabitEthernet4/2/1] flag j0 sdh 1
3.1.7 frame-format
Syntax
frame-format { sdh | sonet }
undo frame-format
View
POS port view
Parameter
sdh: Frame format is SDH.
sonet: Frame format is SONET.
Description
Use the frame-format command to set frame format at the POS port.
Use the undo frame-format command to restore the default frame format at the POS
port.
By default, the frame format of a POS port is SDH.
Example
# Set the frame format of POS2/1/1 to SDH.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface pos2/1/1
[Quidway-Pos2/1/1] frame-format sdh
3.1.8 interface pos
Syntax
interface pos interface-number
View
System view
Parameter
interface-number: POS port number, in the format of board slot ID/daughter card slot
ID/ port ID, where board slot ID refers to the ID of the slot for LPU, in the range of 2 to 6

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English