Huawei Quidway S8500 Series - Chapter 2 AAA and RADIUS;HWTACACS Protocol Configuration Commands; Access-Limit; Accounting Optional

Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-1
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
2.1 AAA Configuration Commands
2.1.1 access-limit
Syntax
access-limit { disable | enable max-user-number }
undo access-limit
View
ISP domain view
Parameter
disable: No limit to the supplicant number in the current ISP domain.
enable max-user-number: Specifies the maximum supplicant number in the current
ISP domain, ranging from 1 to 2312.
Description
Use the access-limit command to configure a limit to the amount of supplicants in the
current ISP domain.
Use the undo access-limit command to restore the limit to the default setting.
By default, there is no limit to the amount of supplicants in the current ISP domain.
This command limits the amount of supplicants contained in the current ISP domain.
The supplicants may contend with each other for the network resources. So setting a
suitable limit to the amount will guarantee the reliable performance for the existing
supplicants.
Example
# Set a limit of 500 supplicants for the ISP domain, huawei163.net.
[Quidway-isp-huawei163.net] access-limit enable 500
2.1.2 accounting optional
Syntax
accounting optional