Huawei Quidway S8500 Series User Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches Chapter 2 BGP/MPLS VPN Configuration Commands
Huawei Technologies Proprietary
2-6
Example
# Display the VPN description.
[Quidway-vpn-vpna] description huawei
2.1.7 display bgp vpnv4
Syntax
display bgp vpnv4 { all | route-distinguisher rd-value | vpn-instance
vpn-instance-name } { group [ group-name ] | network | peer [ [ peer-address ]
verbose ] | routing-table [ options ] }
View
Any view
Parameter
all: Displays all the VPNv4 routings.
route-distinguisher rd-value: Displays the information related to RD.
vpn-instance vpn-instance-name: Displays the information related to VPN instance.
group: Displays the information of a neighbor peer group.
network: Displays the advertised routing information.
peer: Displays the peer information.
verbose: Displays detailed peer information.
routing-table: Displays routing information.
options: Configures to view the routing information.
Description
Use the display bgp vpnv4 command to view the VPN address in BGP table.
Example
# Display all the BGP VPNv4 routing tables.
<Quidway> display bgp vpnv4 all routing-table
Flags: # - valid ^ - active I - internal
D - damped H - history S - aggregate suppressed
In/out As
Dest/mask Next-hop Med Local-pref label path
Route Distinguisher:1.1.1.1:1 (VPN instance:v1)
#^ 1.0.0.0 0.0.0.0 -/1024
Routes total: 1

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English