Huawei Quidway S8500 Series - Chapter 6 DNS Configuration Commands; Static DNS Configuration Commands; Display Ip Host; Ip Host

Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 6 DNS Configuration Commands
Huawei Technologies Proprietary
6-1
Chapter 6 DNS Configuration Commands
6.1 Static DNS Configuration Commands
6.1.1 ip host
Syntax
ip host hostname ip-address
undo ip host hostname [ ip-address ]
View
System view
Parameter
hostname: Name of the host. It is a character string that consists of 1 to 20 characters,
including letters, numbers, "_" or “,”, and it must contain at least one letter.
ip-address: Host IP address (the corresponding IP address to the host name) in dotted
decimal notation.
Description
Use the ip host command to configure the host name and the host IP address.
Use the undo ip host command to cancel the host name and the host IP address.
By default, Host name and corresponding IP address are null.
Related command: display ip host.
Example
# Set swtich1’s IP address to be 10.110.0.1.
[Quidway] ip host switch1 10.110.0.1
6.1.2 display ip host
Syntax
display ip host
View
Any view