Huawei Quidway S8500 Series - Chapter 1 802.1 X Configuration Commands; Configuration Commands; Anti-Attack; Display Dot1 X

Command Manual – Security
Quidway S8500 Series Routing Switches Chapter 1
802.1x Configuration Commands
Huawei Technologies Proprietary
1-1
Chapter 1 802.1x Configuration Commands
1.1 802.1x Configuration Commands
1.1.1 anti-attack
Syntax
anti-attack { arp | dot1x | ip }{ disable | enable }
View
System view
Parameter
arp: ARP packet.
dot1x :dot1 packet.
ip: IP packet.
Description
Use the anti-attack enable command to enable packet attack prevention. Use the
anti-attack disable command to disable packet attack prevention.
By default, IP packet attack prevention is enabled, and ARP packet attack prevention
and dot1x packet attack preventionare disabled.
Example
# Enable ARP packet attack prevention.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway] anti-attack arp enable
# Disable IP packet attack prevention.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway] anti-attack ip disable
1.1.2 display dot1x
Syntax
display dot1x [ enabled-interface | guest vlan | interface interface-list | sessions |
statistics ]