Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 3 Device Management Commands
Huawei Technologies Proprietary
3-8
3.1.11 reboot
Syntax
reboot [ slot slot-no ]
View
User view
Parameter
slot slot-no: Specifies the physical card number.
Description
Use the reboot command to reboot to restart the Ethernet switch or the specified card.
Example
# Reset the Ethernet switch.
<Quidway> reboot
3.1.12 schedule reboot at
Syntax
schedule reboot at hh:mm [ yyyy/mm/dd ]
undo schedule reboot
View
User view
Parameter
hh:mm: Reboot time of the switch, in the format of "hour: minute" The hh ranges from 0
to 23, and the mm ranges from 0 to 59.
yyyy/mm/dd: Reboot date of the switch, in the format of "year/month/day. The yyyy
ranges from 2000 to 2099, the mm ranges from 1 to 12, and the value of dd is related to
the specific month.
Description
Use the schedule reboot at command to enable the timing reboot function of the
switch and set the specific reboot time and date.
Use the undo schedule reboot command to disable the timing reboot function.
By default, the timing reboot switch function is disabled.
To Next Page
Loading...
Need help?
General