Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-38
Description
Use the peer filter-policy export command to configure the filter-policy list of routes
advertised by a peer group.
Use the undo peer filter-policy export command to cancel the existing configuration.
By default, a peer/peer group has no access control list (acl).
The peer filter-policy export command can only be configured on peer groups.
Related command: peer filter-policy export, ip as-path-acl, peer as-path-acl.
Example
# Configure to use acl 2000 to filter the routes advertised by the peer group test.
[Quidway-bgp] peer test filter-policy 2000 export
5.1.43 peer filter-policy import
Syntax
peer { group-name | peer-address } filter-policy acl-number import
undo peer { group-name | peer-address } filter-policy acl-number import
View
BGP view
Parameter
group-name: Specifies the name of the peer group.
peer-address: Specifies the IP address of the peer.
acl-number: Specifies an IP acl number, ranging from 2000 to 3999. That is, you can
use basic ACLs or advanced ACLs.
import: Ingress filter policy. It is only applicable to peer groups.
Description
Use the peer filter-policy import command to configure the filter-policy list of the
routes received by a peer/peer group.
Use the undo peer filter-policy import command to cancel the existing configuration.
By default, a peer/peer group has no access control list (acl).
Related command: ip as-path-acl, peer as-path-acl export, peer as-path-acl
import.
The priority of the inbound filter policy configured for the peer is higher than that
configured for the peer group.
To Next Page
Loading...
