Huawei Quidway S8500 Series User Manual

Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 4 RPR Port Configuration Commands
Huawei Technologies Proprietary
4-12
MAC Address Ringlet TTL IP Address Station Name
00e0-fc00-0011 0 1 201.1.1.1 huawei-3com1
00e0-fc26-0708 1 1 201.1.1.3 huawei-3com2
4.1.8 display rpr statistics
Syntax
display rpr statistics { dmac | smac } [ mac address] [ rpr [ interface-number ] ]
View
Any view
Parameter
dmac: Destination MAC address.
smac: Source MAC address.
mac address: You can input in the format of H-H-H to query the source node bridge
MAC address. All 0 indicates displaying MAC addresses of all nodes in the ring.
interface-number: Port number, in the format of slot number/card number/port number.
Description
Use the display rpr statistics command to query the traffic statistics information of
packets sent from other nodes to local node or from the local node to other nodes. .
Example
Query the traffic from station with bridge MAC address 0012-3456-0001 in the ring.
<Quidway> display rpr statistics smac 0012-3456-0001 RPRPOS3/1/1
Source statistics of interface: RprPos3/1/1
Mac address:00e0-fc01-0010 Packets: 0 Bytes: 0
4.1.9 display rpr timers
Syntax
display rpr timers [ rprpos [ interface-number ]
View
Any view
Parameter
interface-number: Port number, in the format of slot number/card number/port number.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English