Huawei Quidway S8500 Series - Chapter 5 IDS Linkage Configuration Commands; IDS Linkage Configuration Commands; Display Ids; Ids-Acl

Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 5 IDS Linkage Configuration Commands
Huawei Technologies Proprietary
5-1
Chapter 5 IDS Linkage Configuration Commands
5.1 IDS Linkage Configuration Commands
5.1.1 ids-acl
Syntax
ids-acl enable
undo ids-acl enable
View
Ethernet port view
Parameter
disable: Disable IDS linkage on the port.
enable: Enable IDS linkage on the port.
Description
Use the acl-ids enable command to enable IDS linkage function.
Use the undo ids-acl enable command to disable IDS linkage function.
Example
# Enable IDS linkage on port Ethernet 3/1/1.
<Quidway> system-view
[Quidway] interface Ethernet 3/1/1
[Quidway-Ethernet3/1/1] ids-acl enable
5.1.2 display ids
Syntax
display ids { all | controlled-interface | name name | source ip-addr | destination
ip-addr }
View
Any view
Parameter
all: Displays all information about IDS linkage.