Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-41
View
BGP view
Parameter
group-name: Name of peer group.
prefixname: Name of the specified ip-prefix. It is a character string of 1 to 19
characters.
peer-address: IP address of the peer, in dotted decimnal notation.
export: Applies the filtering policy on the route transmitted to the specified peer/peer
group.
Description
Use the peer ip-prefix export command to configure the route filtering policy of routes
advertised by the peer group based on the ip-prefix.
Use the undo peer ip-prefix export command to cancel the route filtering policy of the
peer/peer group based on the ip-prefix.
By default, the route filtering policy of the peer group is not specified.
The peer ip-prefix export command can only be configured on peer groups.
Related command: peer ip-prefix import.
Example
# Configure the route filtering policy of the peer group based on the ip-prefix 1.
[Quidway-bgp] peer group1 ip-prefix list1 export
5.1.47 peer ip-prefix import
Syntax
peer { group-name | peer-address } ip-prefix prefixname import
undo peer { group-name | peer-address } ip-prefix prefixname import
View
BGP view
Parameter
group-name: Name of peer group.
peer-address: IP address of the peer.
prefixname: Name of the specified ip-prefix.
import: Applies the filtering policy on the route received by the specified peer/peer
group.
To Next Page
Loading...
Need help?
General