Huawei Quidway S8500 Series User Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches Chapter 1 MPLS Basic Configuration Commands
Huawei Technologies Proprietary
1-20
TCP Connection: 1.1.1.9 <- 4.4.4.9
Session State: Operational
Session Role: Passive
Session existed time:
Basic Hello Packets Sent/Received: 85/67
KeepAlive Packets Sent/Received: 1/1
Negotiated Keepalive hold time: 60 Peer PV Limit: 0
LDP Basic Discovery Source((A) means active):
Inter vlan113(A) Inter vlan112
Inter vlan111
1.2.9 mpls ldp
Syntax
mpls ldp
undo mpls ldp
View
System view
Parameter
None
Description
Use the mpls ldp command to enable LDP.
Use the undo mpls ldp command to disable LDP.
By default, LDP is disabled.
Before enabling LDP, you must enable MPLS and configure LSR ID first.
Related command: mpls lsr-id.
Example
# Enable LDP.
<Quidway>system-view
[Quidway] mpls ldp
1.2.10 mpls ldp enable
Syntax
mpls ldp enable
mpls ldp disable

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English