Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches
Chapter 7 MBGP Multicast Extension
Configuration Commands
Huawei Technologies Proprietary
7-1
Chapter 7 MBGP Multicast Extension
Configuration Commands
7.1 MBGP Multicast Extension Configuration Commands
7.1.1 aggregate
Syntax
aggregate address mask [ as-set | attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name | suppress-policy
route-policy-name ]*
undo aggregate address mask [ as-set | attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name | suppress-policy
route-policy-name ]*
View
IPv4 multicast sub-address family view
Parameter
address: Address of the aggregated route.
mask: Network mask of the aggregated route.
as-set: Generates a route with AS_SET segment. This parameter is not recommended
when aggregating many AS paths.
attribute-policy route-policy-name: Sets aggregate attribute.
detail-suppressed: Advertises the aggregated routes rather than the specific routes.
origin-policy route-policy-name: Filters the originate routes of the aggregate.
suppress-policy route-policy-name: Does not advertise the specific routes selected.
Description
Use the aggregate command to create a multicast aggregated record in the BGP
routing table.
Use the undo aggregate command to disable this function.
By default, no route is aggregated.
Use the aggregate command without parameters to create one local aggregated route
and set atomic aggregation attributes.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English