Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-18
Example
# Configure the VLAN delivering mode to be of string type.
[Quidway] private_group_id mode standard
2.1.18 self-service-url
Syntax
self-service-url enable url-string
self-service-url disable
View
ISP domain view
Parameter
url-string: The URL (uniform resource locator) of the Web page on a self-service server.
The Web page is used to modify passwords. This argument is a string that is of 1 to 64
characters in length. Do not provide character of “?” in this argument. If an URL
contains "?", replace it with "|" when inputting the URL in the command line.
Description
Use the self-service-url enable command to configure self-service server uniform
resource locator (URL).
Use the self-service-url disable command to remove the configuration of self-service
server URL.
By default, self-service server URL is not configured on a switch.
This command must be incorporated with a RADIUS server (such as a CAMS server)
that supports self-service. Self-service means that users can manage their accounts
and card numbers by themselves. And a server with the self-service software installed
is called a self-service server.
Once this function is enabled on a switch, users can locate the self-service server
through the following operations:
z Select "Change user password" on the 802.1x client.
z After the client opens the default explorer (IE or NetScape), it locates the specified
URL page used to change the user password on the self-service server.
z Change user password on this page.
The "Change user password" option is available only when the user passes the
authentication; otherwise, this option is in grey and unavailable.
To Next Page
Loading...
