Huawei Quidway S8500 Series User Manual

Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 4 DHCP Configuration Commands
Huawei Technologies Proprietary
4-37
Table 4-7 Description on the fields of the display dhcp-security command
Field Description
IP Address User IP address
MAC Address User MAC address
IP Address Type
Type of the user address entry, which
can be static or dynamic
4.3.7 ip relay address
Syntax
ip relay address ip-address
undo ip relay address { ip-address | all }
View
VLAN interface view
Parameter
ip-address: IP address of the DHCP server to which the DHCP packets received by this
VLAN interface are forwarded.
all: Specifies all DHCP servers configured for the VLAN interface to forward DHCP
packets to.
Description
Use the ip relay address command to specify the VLAN interface to operate in DHCP
Relay mode and to specify the DHCP server to which the DHCP packets received by
this VLAN interface are forwarded.
Use the undo ip relay address command to remove the DHCP server configured for
the VLAN interface to forward DHCP packets.
No DHCP server is configured for a VLAN interface by default.
Caution:
The IP address of the intended DHCP server for the Dhcp relay feature cannot be the
IP address of the VLAN interface corresponding to the DHCP Relay. Otherwise, the
system gives the information such as “Can't set ip relay address as interface address
on interface Vlan-interface 100!”.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English