Huawei Quidway S8500 Series User Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 4 Integrated IS-IS Configuration Commands
Huawei Technologies Proprietary
4-29
View
IS-IS view
Parameter
None
Description
Use the log-peer-change command to log the peer changes.
Use the undo log-peer-change command to configure not to log the peer changes.
By default, peer changes log disabled.
After peer changes log is enabled, the IS-IS peer changes will be output on the
configuration terminal until the log is disabled.
Example
# Configure to output the IS-IS peer changes on the current router.
[Quidway-isis] log-peer-change
4.1.33 md5-compatible
Syntax
md5-compatible
undo md5-compatible
View
IS-IS view
Parameter
None
Description
Use the md5-compatible command to set the IS-IS to use the MD5 algorithm which is
compatible with that of the other vendors.
Use the undo md5-compatible command to return to the defaults.
By default, the system uses the MD5 algorithm in IS-IS which is compatible with that of
Huawei.
To authenticate the devices of the vendors other than Huawei using MD5 algorithm in
IS-IS, configure this command.
Example
# Set the IS-IS to use the MD5 algorithm compatible with that of the other vendors.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English