Huawei Quidway S8500 Series User Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-7
[Quidway]clock forcessm off source 10
4.2.3 clock ipuport
Syntax
clock ipuport slot slotid card cardid port portid
View
System view
Parameter
slotid: The slot ID of interface card.
cardid: Card ID of ATM or POS interface card.
portid: Port ID.
Description
Use the clock ipuport command to select the output port of the line clock source of the
interface card.
Example
# Set the output port of the line clock source of the interface card 3 to port 1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] clock lpuport slot 3 card 1 port 1
4.2.4 clock priority
Syntax
clock priority
value source source
View
System view
Parameter
value: Priority level, ranging from 1 to 18 or 255.
source: The index of clock source, ranging from 1 to 18.
Description
Use the clock priority command to set the priority level of the clock source of the clock
module. The value is 255 by default.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English