Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches Chapter 1 ACL Commands
Huawei Technologies Proprietary
1-3
1.1.2 display acl config
Syntax
display acl config { all | acl-number | acl-name }
View
Any view
Parameter
all: Displays all ACLs (both number- and name-identified ones).
acl-number: Serial number of the ACL to be displayed, in the range of 2000 to 5999.
acl-name: Name of the ACL to be displayed. String parameter which must start with an
English letter ([a-z, A-Z]) and no space is allowed in it.
Description
Use the display acl config command to view the configuration details of the ACL,
including all the rules, their serial numbers, quantities and number of bytes of matched
packets.
The matched times here refer to the software matched times, that is, the matched times
of the ACLs that needed to be processed by CPU. You can collect hardware matched
times value by using the traffic-statistic command.
Example
# Display contents of all ACLs.
<Quidway> display acl config all
Link ACL 4000, 1 rule,
rule 0 permit ingress any egress any
Basic ACL traffic-of-host, 1 rule,
rule 1 deny source 10.1.1.1 0 time-range huawei-3com(0 times matched) (Active)
1.1.3 display acl remaining entry
Syntax
display acl remaining entry slot slotid
View
Any view
Parameter
slot slotid: the ID of the specified slot.
To Next Page
Loading...
Need help?
General