Huawei Quidway S8500 Series - Page 628

Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches Chapter 1 ACL Commands
Huawei Technologies Proprietary
1-4
Description
Use the display acl running-packet-filter command to display the total number of
ACL rules that are applied on the specified card.
Example
# Display the total number of ACL rules that are applied on the slot 5.
<Quidway> display acl remaining entry slot 5
Slot: 5
Resource Total Reserved Configured Remaining Start End
Type Number Number Number Number Port Name Port Name
--------------------------------------------------------------------------
METER 256 0 0 256 GE5/1/1 GE5/1/12
METER 256 0 0 256 GE5/1/13 GE5/1/24
RULE 1024 0 0 1024 GE5/1/1 GE5/1/12
RULE 1024 0 0 1024 GE5/1/13 GE5/1/24
ACTION 1024 0 0 1024 GE5/1/1 GE5/1/12
ACTION 1024 0 0 1024 GE5/1/13 GE5/1/24
Table 1-1 The description of the information on display
Field Description
Resource Type
Resource type
METER: the resource is the flow meter
resource;
RULE: the resource is the rule resource;
ACTION: the resource is action resource
Total Number
The total number of ACL rules that are
supported by the hardware
Reserved Number The number of the reserved ACL rules
Configured Number
The number of the ACL rules that have been
configured
Remaining Number The number of the remaining ACL rules
Start Port Name, End Port Name The names of the start port and the end port
1.1.4 display acl running-packet-filter
Syntax
display acl running-packet-filter { all | interface interface-type interface- number |
vlan vlan-id }