Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 5 PIM Configuration Commands
Huawei Technologies Proprietary
5-10
Field Description
PIM DR Designated router
5.1.10 display pim neighbor
Syntax
display pim neighbor [ interface interface-type interface-number ]
View
Any view
Parameter
interface interface-type interface-number: Interface type and interface number, used to
specify the interface.
Description
Use the display pim neighbor command to view the PIM neighbor information
discovered by the switch interface. If the interface type and interface number are
specified, this command only displays the PIM neighbor information on the specified
interface.
Example
# Display PIM neighbor information discovered by the switch interface.
<Quidway> display pim neighbor
Neighbor's Address Interface Name Uptime Expires
90.0.0.2 Vlan-interface90 00:00:36 00:01:40
Table 5-3 Description of output information of display pim neighbor command
Field Description
Neighbor Address Neighbor address
Interface Interface where the neighbor has been discovered
Uptime Time passed since the multicast group has been discovered
Expires Specifies when the member will be removed from the group

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English