Huawei Quidway S8500 Series User Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches
Chapter 8 SSH Terminal Service Configuration
Commands
Huawei Technologies Proprietary
8-8
When inputting the public key, you may type spaces between the characters (the
system will delete the spaces automatically), or press <Enter> and then continue to
input the key. Note that the public key must be a hexadecimal string coded in the public
key format and is randomly generated by the SSH 2.0-enabled client software or the
client switch.
Related command: rsa peer-public-key, public-key-code end.
Example
# Enter the public key edit view and input the key.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] rsa peer-public-key quidway003
[Quidway-rsa-public-key] public-key-code begin
RSA key code view: return to last view with "public-key-code end".
[Quidway-key-code] 308186028180739A291ABDA704F5D93DC8FDF84C427463
[Quidway-key-code] 1991C164B0DF178C55FA833591C7D47D5381D09CE82913
[Quidway-key-code] D7EDF9C08511D83CA4ED2B30B809808EB0D1F52D045DE4
[Quidway-key-code] 0861B74A0E135523CCD74CAC61F8E58C452B2F3F2DA0DC
[Quidway-key-code] C48E3306367FE187BDD944018B3B69F3CBB0A573202C16
[Quidway-key-code] BB2FC1ACF3EC8F828D55A36F1CDDC4BB45504F020125
[Quidway-key-code] public-key-code end
[Quidway-rsa-public-key]
8.1.9 public-key-code end
Syntax
public-key-code end
View
Public key edit view
Parameter
None
Description
Use the public-key-code end command to return from the public key edit view to the
public key view and save the public key entered.
After this command is performed to end the public key edit procedure, the system will
check the validity of the key before saving the input public key. If the public key string
contains any illegal character, the system will prompt the failure of the configuration and

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English