Huawei Quidway S8500 Series - Display Mpls L3 Vpn-Lsp

Command Manual – MPLS
Quidway S8500 Series Routing Switches Chapter 2 BGP/MPLS VPN Configuration Commands
Huawei Technologies Proprietary
2-9
View
Any view
Parameter
vpn-instance-name: Name assigned to VPN-instance.
verbose: Displays detailed information.
Description
Use the display ip vpn-instance command to view the information related to
VPN-instance, such as RD, description, and interfaces of the VPN instance.
Example
# Display the information about VPN-instance VPN 1.
<Quidway> display ip vpn-instance vpn1
VPN-Instance : vpn1
No description
Route-Distinguisher : 100:6
Interfaces :
Vlan-interface1100
2.1.11 display mpls l3vpn-lsp
Syntax
display mpls l3vpn-lsp [ vpn-instance vpn-instance-name ] [ transit | egress |
ingress ] [ include text | verbose ]
View
Any view
Parameter
transit: LSP for the ASBR (Autonomous System Boundary Router).
egress: LSP of egress VPN.
ingress: LSP of ingress VPN.
vpn-instance: Specifies the name of VPN routing/forwarding VPN-instance
include text: Only matches the string including the specified information.
verbose: Displays detailed information.
Description
Use the display mpls l3vpn-lsp command to view the information of MPLS L3VPN
LSPs of the specified VPN-instance.