Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches
Chapter 7 MBGP Multicast Extension
Configuration Commands
Huawei Technologies Proprietary
7-13
med-value: Specifies the metric value loaded by an imported route, ranging from 0 to
4,294,967,295.
route-policy-name: Specifies the route policy used for importing routes.
Description
Use the import-route command to import routing information of other protocols into
MBGP.
Use the undo import-route command to cancel the importing.
By default, MBGP will not import routing information of other protocols.
Example
# Import static routes.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] bgp 100
[Quidway-bgp] ipv4-family multicast
[Quidway-bgp-af-mul] import-route static
7.1.20 ipv4-family multicast
Syntax
ipv4-family multicast
undo ipv4-family multicast
View
BGP view, VPN instance sub-address family view, VPNv4 sub-address family view
Parameter
None
Description
Use the ipv4-family multicast command to enter the IPv4 multicast sub-address
family view.
Use the undo ipv4-family multicast command to exit the IPv4 multicast sub-address
family view, return to the unicast view and remove all the information in multicast.
Example
# Enter the IPv4 multicast sub-address family view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English