Huawei Quidway S8500 Series - Chapter 5 Q-In-Q Configuration Commands; Q-In-Q Configuration Commands; Display Port Vlan-Vpn; Traffic-Redirect { Nested-Vlan | Modified-Vlan

Command Manual – VLAN&QinQ
Quidway S8500 Series Routing Switches Chapter 5
Q-in-Q Configuration Commands
Huawei Technologies Proprietary
5-1
Chapter 5 Q-in-Q Configuration Commands
5.1 Q-in-Q Configuration Commands
5.1.1 display port vlan-vpn
Syntax
display port vlan-vpn
View
Any view
Parameter
None
Description
Use the display port vlan-vpn command to display VLAN VPN-related information of
the current system by port number, including current TPID, the information about
VLAN-VPN ports, and the information about VLAN-VPN uplink ports.
Example
# Display the VLAN VPN-related configuration of the current system.
[Quidway] display port vlan-vpn
VLAN-VPN TPID: 0x9100
GigabitEthernet1/1/1
VLAN-VPN status: enabled
VLAN-VPN VLAN: 1
GigabitEthernet1/1/2
VLAN-VPN uplink status: enabled
5.1.2 traffic-redirect { nested-vlan | modified-vlan }
Syntax
I. Use the following command to deliver Layer 3 traffic classification rules.
traffic-redirect inbound ip-group { acl-number | acl-name } [ rule rule [ system-index
index ] ] { nested-vlan nested-vlanid | modified-vlan modified-vlanid }
undo traffic-redirect inbound ip-group { acl-number | acl-name } [ rule rule ]