Huawei Quidway S8500 Series User Manual

Command Manual – VLAN&QinQ
Quidway S8500 Series Routing Switches Chapter 2
GARP/GVRP Configuration Commands
Huawei Technologies Proprietary
2-5
interface-number is interface number. The interface-number after the keyword to must
be larger than or equal to that before to. &<1-10> means that the preceding parameter
can be repeated up to 10 times.
Description
Use the reset garp statistics command to reset the GARP statistics information (such
as the packets received/sent and discarded by GVRP/GMRP). If the command has no
parameter, it will clear the GARP statistics information of all the ports.
Related command: display garp statistics.
Example
# Clear GARP statistics information.
<Quidway> reset garp statistics
2.2 GVRP Configuration Commands
2.2.1 display gvrp statistics
Syntax
display gvrp statistics [ interface interface-list ]
View
Any view
Parameter
Interface-list: List of Ethernet ports on which the GVRP statistics information is to be
displayed, expressed as interface-list = { interface-type interface-number } [ to
interface-type interface-number] }&<1-10>. interface-type is interface type, and
interface-number is interface number. The interface-number after the keyword to must
be larger than or equal to that before to. &<1-10> means that the preceding parameter
can be repeated up to 10 times.
Description
Use the display gvrp statistics command to view the GVRP statistics information of
all the Trunk ports, including GVRP status information, failed GVRP registration entries
and the last GVRP data unit origin.
Example
# Display the GVRP statistics information on Ethernet2/1/1.
<Quidway> display gvrp statistics interface ethernet2/1/1
GVRP statistics on port Ethernet2/1/1
GVRP Status : Enabled

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English