Huawei Quidway S8500 Series User Manual

Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-8
1.1.6 display jumboframe configuration
Syntax
display jumboframe configuration
View
Any view
Parameter
None
Description
Use the display jumboframe configuration command to view the Jumbo frame
configuration on all cards. The supported Jumbo frame length ranges, as well as the
default values, may vary from card to card.
Example
# Display the current Jumboframe configuration in the system.
<Quidway>system-view
[Quidway] display jumboframe configuration
The jumboframe configuration at present:
Slot 2:
Allow jumbo frame to pass
The Maximum Frame Length is 1552
1.1.7 display port
Syntax
display port { hybrid | trunk }
View
Any view
Parameter
hybrid: Displays Hybrid port.
trunk: Displays Trunk port.
Description
Use the display port command to view the ports in the current system, whose link type
is Hybrid or Trunk. If there is any such port, display the corresponding port name.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English