Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 1 IGMP Snooping Configuration Commands
Huawei Technologies Proprietary
1-4
Parameter
None
Description
Use the display igmp-snooping statistics command to view the statistics information
on IGMP Snooping.
This command displays the information such as the number of received general IGMP
query packets, received IGMP group-specific query packets, received IGMP v1 packets,
received IGMP v2 packets, received IGMP leave packets and error packets, and sent
IGMP group-specific query packets.
Related command: igmp-snooping.
Example
# Display statistics information about IGMP Snooping.
<Quidway> display igmp-snooping statistics
Received IGMP general query packet(s) number:0.
Received IGMP specific query packet(s) number:0.
Received IGMP V1 report packet(s) number:0.
Received IGMP V2 report packet(s) number:0.
Received IGMP leave packet(s) number:0.
Received error IGMP packet(s) number:0.
Sent IGMP specific query packet(s) number:0.
The information above shows that:
IGMP Snooping receives:
z 0 IGMP general query packets
z 0 IGMP group-specific query packets
z 0 IGMP v1 report packets
z 0 IGMP v2 report packets
z 0 IGMP leave packets
z o IGMP error packets
IGMP Snooping sends:
z 0 IGMP group-specific query packets
1.1.5 igmp-snooping
Syntax
igmp-snooping { enable | disable }
View
System view, VLAN view
To Next Page
Loading...
Need help?
General