Huawei Quidway S8500 Series - Display Rmon History

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 6 RMON Configuration Commands
Huawei Technologies Proprietary
6-4
Table 6-3 Description on the fields of the display rmon eventlog command
Field Description
Event table 1 Index 1 in event table
VALID
The entry corresponding to the index is
valid
Description Event description
less than(or =) 100 with alarm value 0
The alarm sample value is less than or
equal to 100
Alarm sample type is absolute The type of alarm sampling is absolute
Generates eventLog 1.2 at 0days
00h:02m:27s
The eventlog corresponding to the index
1.2 is generated at 0days 00h:02m:27s.
6.1.4 display rmon history
Syntax
display rmon history [ port-num ]
View
Any view
Parameter
port-num: Ethernet port name.
Description
Use the display rmon history command to view latest RMON history sampling
information (including utility, error number and total packet number).
Related command: rmon history.
Example
# Show the RMON history information.
<Quidway> display rmon history ethernet 2/1/1
History control entry 1 owned by null is VALID
Samples interface : Ethernet2/1/1<ifEntry.642>
Sampling interval : 10(sec) with 10 buckets max
Latest sampled values :
Dropevents :0 , octets :0
packets :0 , broadcast packets :0
multicast packets :0 , CRC alignment errors :0
undersize packets :0 , oversize packets :0