Command Manual – STP
Quidway S8500 Series Routing Switches Chapter 1
MSTP Configuration Commands
Huawei Technologies Proprietary
1-2
1.1.2 check region-configuration
Syntax
check region-configuration
View
MST region view
Parameter
None
Description
Use the check region-configuration command to view the configuration information
(including switch region name, revision level, and VLAN mapping table) to be activated.
MSTP defines that the user must ensure the correct region configurations, especially
the VLAN mapping table configuration. The switches can be configured in the same
region only if their region names, VLAN mapping tables, and MSTP revision levels are
configured exactly the same. The switch may not be configured in the expected region
due to any slight deviation. You can use this command to display the MST region
configuration information to be activated to know to which MST regions the switch
belongs and check if the MST region configurations are correct.
Related command: instance, region-name, revision-level, vlan-mapping modulo,
active region-configuration.
Example
# Display the configuration information about the region.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway]stp region-configuration
[Quidway-mst-region] check region-configuration
Admin. Configuration
Format selector :0
Region name :00b010000001
Revision level :0
Instance Vlans Mapped
0 1 to 9, 11 to 4094
16 10
To Next Page
Loading...
