Huawei Quidway S8500 Series - Display Domain

Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-6
Description
Use the display connection command to view the relevant information of all the
supplicants or the specified one(s). The output can help you with the user connection
diagnosis and troubleshooting.
If no parameter is specified, this command displays the related information about all
connected users.
Related command: cut connection.
Example
# Display the relevant information of all the users.
<Quidway> display connection
Total 0 connections matched ,0 listed.
2.1.6 display domain
Syntax
display domain [ isp-name ]
View
Any view
Parameter
isp-name: Specifies the ISP domain name, with a character string not exceeding 24
characters. The specified ISP domain shall have been created.
Description
Use the display domain command to view the configuration of a specified ISP domain
or display the summary information of all ISP domains.
By default, this command displays the summary information about all the ISP domains
in the system.
This command is used to output the configuration of a specified ISP domain or display
the summary information of all ISP domains. If an ISP domain is specified, the
configuration information will be displayed exactly the same, concerning the content
and format, as the displayed information of the display domain command. The output
information can help with ISP domain diagnosis and troubleshooting.
Related command: access-limit, domain, radius scheme, user-template, state,
display domain.
Example
# Display the summary information of all ISP domains of the system.