Huawei Quidway S8500 Series User Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 7 NTP Configuration Commands
Huawei Technologies Proprietary
7-5
Description
Use the ntp-service access command to set the authority to access the local
equipment.
Use the undo ntp-service access command to cancel the access authority settings.
By default, there is no limit to the access.
Set authority to access the NTP services on a local Ethernet Switch. This is a basic and
brief security measure, compared to authentication. An access request will be matched
with peer, server, synchronization, and query in an ascending order of the limitation.
The first matched authority will be given.
Example
# Give the authority of time request, query control and synchronization with the local
equipment to the peer in ACL 2000.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ntp-service access peer 2000
# Give the authority of time request and query control of the local equipment to the peer
in ACL 2000.
[Quidway] ntp-service access synchronization 2000
7.1.6 ntp-service authentication enable
Syntax
ntp-service authentication enable
undo ntp-service authentication enable
View
System view
Parameter
None
Description
Use the ntp-service authentication enable command to enable the NTP-service
authentication function.
Use the undo ntp-service authentication enable command to disable this function.
By default, the authentication is disabled.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English