Huawei Quidway S8500 Series User Manual

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches Chapter 1
HGMP V1 Configuration Commands
Huawei Technologies Proprietary
1-8
Field Description
Lanswitch Name The name of the switch
Model The model of the switch
Device ID The device ID of the switch
MacAddr The MAC address of the switch
Status The state of the switch
1.1.6 hgmpport
Syntax
hgmpport { enable | disable }
View
Ethernet port view
Parameter
enable: Specifies to enable HGMP on the Ethernet switch port.
disable: Specifies to disable HGMP on the Ethernet switch port.
Description
Use the hgmpport command to enable/disable HGMP on an Ethernet switch port.
After enabling HGMP globally, you must enable HGMP on an Ethernet switch port to
collect information about it.
Example
# Enable HGMP on Ethernet3/1/3 port of the management device.
[Quidway-Ethernet3/1/3] hgmpport enable
1.1.7 hgmpserver
Syntax
hgmpserver { enable | disable }
undo hgmpserver
View
System view

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English