Huawei Quidway S8500 Series - Screen-Length

Command Manual – Getting Started
Quidway S8500 Series Routing Switches Chapter 1
Commands Used to Log in to Switch
Huawei Technologies Proprietary
1-20
Parameter
None
Description
Use the return command to return to user view from a view other than user view.
Combination key <Ctrl+Z> performs the same function with the return command.
Related command: quit.
Example
# Return to user view from system view.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway]vlan 2
[Quidway-vlan2] return
<Quidway>
1.1.22 screen-length
Syntax
screen-length screen-length
undo screen-length
View
User interface view
Parameter
screen-length: Specifies how many lines can be displayed on a screen, ranging from 0
to 512. The default value is 24.
Description
Use the screen-length command to configure how many lines that can be displayed
on a screen of the terminal.
Use the undo screen-length command to restore the default number of terminal
information lines displayed on the terminal screen.
By default, 24 lines (including the multi-screen identifier lines) are displayed in one
screen when the multi-screen display function is enabled.
The screen-length 0 command is used to disable this function.
Example
# Configure the lines that can be displayed on a screen as 20 lines.